Handmade Field Gates Pattern No 23 (with irons bars)

Handmade Field Gates Pattern No. 23 (with iron bars).

Field Gate with iron bars. Round Iron Bars. Iron Bands on Head of Gate.

 

In ordering this Gate it should be stated if the Safety Spring Fastener is required. A 2700mm Gate leaves about 2550mm opening and a 3000m Gate about 2850mm opening. Longer gates made to order. Field Gates are carried 20 to the Tonne.

As all of our field gates are handmade, images shown are for illustrative purposes only and may differ slightly from the finished gate.
Please note that the posts shown in the images are not included as standard, but can be supplied as part of your order. Any ironwork shown is also not included as standard. We can supply gate posts and ironwork if required. Please indicate on the enquiry form your gate post and ironwork requirements.
Unless stated at point of order, all handmade field gates are made to hinge on the right-hand post when opening from you. The gates illustrated are all right-handed gates, and are only put in front of posts to show the whole of the gate. A gate hung on the right-hand post and opening from you is a right-hand gate; if hung on the left-hand post it is a left-handed gate. Field Gates are carried 20 to the Tonne.
Make Enquiry ...

Pattern No 23

Height

1200mm

Length

2850mm

Back

75mm x 75mm

Bottom Rail

63mm x 75mm

Groin

75mm x 113mm

Head

63mm x 75mm

Braces

63mm x 91mm

Struts

63mm x 75mm

Posts for above

One 2.4m about 225mm x 225mm and one 2.4m 175mm x 175mm. Bevelled Tops. 7 Pairs Posts = 1 Tonne.