Handmade Field Gates Pattern V

Handmade Field Gates Pattern V.

This is a light but strong gate, being bolted together and made on a new principle to prevent sagging. It is suitable for Hunting countries, it is easy to open, and it is made to swing between the posts. A special set of ironwork supplied, with bottom hinge fitted with nuts to enable head of gate to be raised or lowered.

As all of our field gates are handmade, images shown are for illustrative purposes only and may differ slightly from the finished gate.
Please note that the posts shown in the images are not included as standard, but can be supplied as part of your order. Any ironwork shown is also not included as standard. We can supply gate posts and ironwork if required. Please indicate on the enquiry form your gate post and ironwork requirements.
Unless stated at point of order, all handmade field gates are made to hinge on the right-hand post when opening from you. The gates illustrated are all right-handed gates, and are only put in front of posts to show the whole of the gate. A gate hung on the right-hand post and opening from you is a right-hand gate; if hung on the left-hand post it is a left-handed gate. Field Gates are carried 20 to the Tonne.
Make Enquiry ...

Pattern V






38mm x 163mm tapered to 38mm x 113mm from 38mm x 275mm


25mm x 75mm


50mm x 150mm


2 pieces 25mm x 75mm


25mm x 75mm

Posts for above 2.4m

200mm x 200mm and 175mm x 175mm bevelled tops. About 18 Gates = 1 Tonne. 8 Pairs Posts = 1 Tonne.